Back to Blog
How-to Guides 2026-11-16 Lasko: #1 Fan & Heater Brand in the USA | Fans, Heaters, Air 0 views

Lasko Cyclone 18" Pedestal Fan: Remote and 4-Speed Setup

Lasko Cyclone 18" Pedestal Fan: Remote and 4-Speed Setup

Set up your Lasko Cyclone 18" pedestal fan in minutes. Learn no-tool assembly, remote pairing, 4-speed selection, oscillation, and head tilt for targeted airflow.

Start with the stand, then the fan head

The Lasko Cyclone 18" Pedestal Fan is designed for no-tool assembly, so you can go from box to breeze without hunting for a screwdriver. Begin by attaching the fan head to the adjustable pole, then secure the pole to the base. The height adjusts from 41 to 53 inches—set it before you tighten everything down so you can position airflow where you need it.

No-tool assembly in three steps

  1. Attach the fan head to the pole: Align the head with the top of the adjustable pole and secure it using the built-in connectors. No tools are required.
  2. Set the height: Slide the pole to your preferred height between 41 and 53 inches, then lock it in place. This determines how high the airflow hits.
  3. Secure the base: Connect the pole to the base and tighten by hand. Place the fan on a flat, stable surface before plugging it in.

Power up and pair the remote

Plug the fan into a standard outlet. The remote control comes ready to use—no pairing sequence is documented in the supplied information. Point the remote at the fan and press the power button to turn it on. If the fan does not respond, check that the remote battery is installed correctly (refer to the battery compartment) and that you are within range.

Choose your speed and airflow pattern

The Cyclone offers four quiet speeds. Start on the lowest setting for background air movement, then increase as needed. Press the oscillation button to spread air across the room—ideal for large bedrooms, living rooms, or home offices. To direct airflow at a specific spot, turn off oscillation and tilt the fan head up or down.

What the Cyclone 18" delivers

Placement tips for better cooling

Position the fan so it blows air toward the area you occupy—not at a wall. For cross-ventilation, place it near a window or doorway. Keep the fan on a stable surface and avoid placing it where cords can become a tripping hazard. The adjustable height and tilting head make it easy to aim airflow at a desk, bed, or sofa.

Related Articles

Customer Service
Home
Products
Cart
Profile