Back to Blog
How-to Guides 2026-11-20 Lasko: #1 Fan & Heater Brand in the USA | Fans, Heaters, Air 0 views

How to Replace the Pre Filter on a B-Air Air Scrubber

How to Replace the Pre Filter on a B-Air Air Scrubber

A clear, step-by-step guide to replacing the B-Air AS-PF Stage 1 pre filter on AS-550 and RA-650 air scrubbers. Learn what this filter does and how often to change it.

What the AS-PF Pre Filter Does

The B-Air AS-PF Stage 1 pre filter is the first line of defense in your AS-550 or RA-650 air scrubber. It captures the largest airborne particles before they reach the higher-efficiency filters inside the machine. This synthetic fiber filter media is rated at 10% efficiency and is designed to be replaced regularly to keep the scrubber working at full capacity.

Because the pre filter traps coarse debris first, it extends the life of the more expensive internal filters. Changing it on schedule is the single most important maintenance step for these air scrubbers.

B-Air AS-PF Pre Filter at a Glance

How to Replace the Pre Filter

The replacement process itself is straightforward. The AS-PF pre filter is designed to slide into the first stage of the AS-550 or RA-650 air scrubber. Below are the general steps based on the supplied information.

  1. Turn off and unplug the air scrubber: Always disconnect power before accessing the filter compartment to avoid accidental startup.
  2. Open the pre filter access panel or door: Locate the latch or release on the front or side of the unit. The exact mechanism may vary by model.
  3. Remove the old pre filter: Slide out the used synthetic fiber filter. Dispose of it according to local regulations.
  4. Insert the new B-Air AS-PF pre filter: Align the new filter with the slot and push it fully into place until it sits flush. The fiber media is oriented to catch particles on the intake side.
  5. Close and secure the access panel: Make sure the door or cover is fully closed and latched before plugging the scrubber back in.
  6. Restore power and verify operation: Plug the unit in and run it briefly to confirm airflow returns to normal and there are no unusual sounds.

When to Replace the Pre Filter

The supplied information states that the pre filter should be replaced regularly to ensure maximum performance, but it does not specify a fixed schedule. In practice, check the filter visually every few weeks. If it appears heavily loaded with dust or debris, it is time for a change. Heavy-duty use in construction, renovation, or high-dust environments will require more frequent replacement than light residential use.

A good rule of thumb is to replace the pre filter whenever you notice a drop in airflow or the machine seems to be working harder. This protects the main filter and keeps the scrubber running efficiently.

Related Articles

Customer Service
Home
Products
Cart
Profile