Position the Max Storm 35 before you power it on
The BlueDri Max Storm 35 is a 2900 CFM air mover built for drying jobs, and getting the most from it starts with placement. Because the head can be set to three drying angles, you can aim airflow at the floor, along a wall, or across a room without moving the whole unit. Decide where the air needs to go first, then adjust the head before you turn it on.
At 17.3 x 16 x 18 inches and 26 pounds, the Max Storm 35 is designed to be carried from one spot to another. Set it on a stable surface where the intake and outlet are not blocked, and keep the cord route clear of walkways.
A simple setup sequence for the Max Storm 35
- Place the unit on a stable, level surface: The 26-pound housing sits on a roto-molded base. Choose a spot where it will not tip or slide, and where the airflow path is unobstructed.
- Set the head to one of the three drying angles: The head positions at 0, 45, or 90 degrees. Pick the angle that directs air where you need it—lower angles for floors, higher angles for walls or wider coverage.
- Plug into a GFCI-protected outlet: The Max Storm 35 has a 25-foot cord and a GFCI daisy-chain port. Use a GFCI outlet for safety, especially in damp areas.
- Choose a speed setting: The three-speed control lets you match airflow to the job. High delivers 2900 CFM while drawing 3.3 amps; lower speeds reduce airflow and noise.
- Connect additional units if needed: The GFCI daisy-chain port supports up to 5 units. Use it to link multiple air movers from a single power source, but do not exceed the circuit's capacity.
- Wrap the cord for storage: When the job is done, unplug the unit and use the cord wrap to keep the 25-foot cord tidy. This protects the cord and makes the next setup faster.
Match the drying angle to the task
The three head positions—0, 45, and 90 degrees—give you flexibility without repositioning the entire unit. Use the lowest angle to push air across a wet floor. The middle angle works well for drying walls or reaching under furniture. The highest angle can help circulate air in a larger space or speed drying on elevated surfaces.
Keep in mind that airflow is strongest directly in front of the outlet. For best results, aim the head so the air moves along the surface you want to dry, and avoid placing the unit where the airstream immediately hits an obstacle.
Key specs that affect setup
- BlueDri Max Storm 35 1/3 HP 2900 CFM Air Mover Blower Fan: 3-Speed, high Velocity, 2 Outlets, 3 Drying Angles, Cord Wrap: 2900 CFM airflow across three speed settings, drawing 3.3 amps on high. High airflow moves more air for faster drying, while the amp draw helps you plan circuit load when using multiple units.

BlueDri Max Storm 35 1/3 HP 2900 CFM Air Mover Blower Fan: 3-Speed, high Velocity, 2 Outlets, 3 Drying Angles, Cord Wrap - BlueDri Max Storm 35 1/3 HP 2900 CFM Air Mover Blower Fan: 3-Speed, high Velocity, 2 Outlets, 3 Drying Angles, Cord Wrap: Head positions at 0, 45, or 90 degrees. These angles let you direct airflow at floors, walls, or across a room without moving the base.
- BlueDri Max Storm 35 1/3 HP 2900 CFM Air Mover Blower Fan: 3-Speed, high Velocity, 2 Outlets, 3 Drying Angles, Cord Wrap: 25-foot cord and GFCI daisy-chain port for up to 5 units. The long cord reaches distant outlets, and the daisy-chain port simplifies powering multiple air movers in one area.
- BlueDri Max Storm 35 1/3 HP 2900 CFM Air Mover Blower Fan: 3-Speed, high Velocity, 2 Outlets, 3 Drying Angles, Cord Wrap: 17.3 x 16 x 18 inches and 26 pounds. The size and weight make the unit portable and easy to position, but ensure a stable footing before operation.
Using the dual outlets and cord wrap safely
- Daisy-chain up to 5 units: The GFCI daisy-chain port lets you connect multiple Max Storm 35 units. Use only compatible cords and do not exceed the amperage rating of the circuit or the first GFCI outlet.
- Test the GFCI before each use: Press the test button on the GFCI port to confirm it trips, then reset. This verifies protection in damp environments.
- Wrap the cord loosely: Use the cord wrap to coil the 25-foot cord without kinks. Avoid wrapping it tightly around the unit, which can damage the insulation.
- Inspect the cord regularly: Check for cuts, frays, or exposed wires. Replace the cord or unit if damage is found—do not tape over damaged sections.
What the supplied information does not cover
The supplied product record does not include specific care instructions, assembly steps beyond head positioning, or safety ratings for children. For detailed maintenance and safety guidance, refer to the manufacturer's documentation. Always follow local electrical codes and use GFCI protection when operating air movers in wet areas.


